Experimental and Numerical Study to Determine the Relationship between Tensile Strength and Compressive Strength of Concrete
Abstract
As one of the most widely used materials in different structures, concrete is a material evaluated and categorized based on compressive strength criterion. In addition, national and international codes (INBC- part 9) and standards determine the tensile strength of concrete based on its compressive strength. The purpose of this research is to determine the relationship between compressive strength and tensile strength of C20, C30 and C40 grades. In this laboratory research, a total of 42 cubic specimens of 150 × 150 × 150 mm and 42 cylindrical specimens of 300 × 150 mm were assessed under compressive and tensile tests, respectively. Based on the results of this study, the relationships presented in Ninth Article of Iranian National Building Codes, ACI-318 and Euro Code 2 have been evaluated.
Keywords
References
ACI Committee, American Concrete Institute, and International Organization for Standardization. "Building code requirements for structural concrete (ACI 318-08) and commentary." American Concrete Institute, (2008).
Phani, S. S., T. S. Sekhar, and S. Rao. "Sravana. Evaluation of relationship between mechanical properties of high strength self compacting concrete." Am J Eng Res 2 (2013): 67-71.
Arιoglu, Nihal, Z. Canan Girgin, and Ergin Arιoglu. "Evaluation of ratio between splitting tensile strength and compressive strength for concretes up to 120 MPa and its application in strength criterion." ACI Materials Journal 103, no. 1 (2006): 18-24.
Lavanya, G., and J. Jegan. "Evaluation of relationship between split tensile strength and compressive strength for geopolymer concrete of varying grades and molarity." Int. J. Appl. Eng. Res 10, no. 15 (2015): 35523-27.
Gajendran, K.A., Anuradha, R., Venkatasubramani, G.S., Studies on relationship between compressive and splitting tensile strength of high performance concrete. ARPN J. Eng. Appl. Sci. 10 (14), (2015): 6151–6156.
Öttl, Christian, and Hans Schellhorn. “Examination of the Relation between Tensile/flexural Strength and Compressive Strength of Autoclaved Aerated Concrete According to prEN 12602.” Advances in Construction Materials 2007 (n.d.): 749–756. doi:10.1007/978-3-540-72448-3_76.
Anuradha, R., V. Sreevidya, R. Venkatasubramani, and B. Vijaya Rangan. "Relationship between compressive and splitting tensile strength of geopolymer concrete." The Indian Concrete Journal 85, no. 11 (2011): 18-24.
Yan, Kezhen, Hongbing Xu, Guanghui Shen, and Pei Liu. “Prediction of Splitting Tensile Strength from Cylinder Compressive Strength of Concrete by Support Vector Machine.” Advances in Materials Science and Engineering 2013 (2013): 1–13. doi:10.1155/2013/597257.
Yao, Weilai, Shiyong Jiang, Wei Fei, and Tao Cai. “Correlation Between the Compressive, Tensile Strength of Old Concrete Under Marine Environment and Prediction of Long-Term Strength.” Advances in Materials Science and Engineering 2017 (2017): 1–12. doi:10.1155/2017/8251842.
Akinpelu, Mutiu A., Samson O. Odeyemi, Oladipupo S. Olafusi, and Fatimah Z. Muhammed. “Evaluation of Splitting Tensile and Compressive Strength Relationship of Self-Compacting Concrete.” Journal of King Saud University - Engineering Sciences (January 2017). doi:10.1016/j.jksues.2017.01.002.
Chhorn, Chamroeun, Seong Jae Hong, and Seung Woo Lee. “Relationship between Compressive and Tensile Strengths of Roller-Compacted Concrete.” Journal of Traffic and Transportation Engineering (English Edition) 5, no. 3 (June 2018): 215–223. doi:10.1016/j.jtte.2017.09.002.
Zhang, L, X X Han, J Ge, and C H Wang. “The Relationship between Compressive Strength and Flexural Strength of Pavement Geopolymer Grouting Material.” IOP Conference Series: Materials Science and Engineering 292 (January 2018): 012114. doi:10.1088/1757-899x/292/1/012114.
Badarloo, Baitollah, and Faezeh Jafari. “A Numerical Study on the Effect of Position and Number of Openings on the Performance of Composite Steel Shear Walls.” Buildings 8, no. 9 (September 1, 2018): 121. doi:10.3390/buildings8090121.
Khotbehsara, Mojdeh Mehrinejad, Bahareh Mehdizadeh Miyandehi, Farzad Naseri, Togay Ozbakkaloglu, Faezeh Jafari, and Ehsan Mohseni. “Effect of SnO 2 , ZrO 2 , and CaCO 3 Nanoparticles on Water Transport and Durability Properties of Self-Compacting Mortar Containing Fly Ash: Experimental Observations and ANFIS Predictions.” Construction and Building Materials 158 (January 2018): 823–834. doi:10.1016/j.conbuildmat.2017.10.067.
Ghanei, Amir, Faezeh Jafari, Mojdeh Mehrinejad Khotbehsara, Ehsan Mohseni, Waiching Tang, and Hongzhi Cui. “Effect of Nano-CuO on Engineering and Microstructure Properties of Fibre-Reinforced Mortars Incorporating Metakaolin: Experimental and Numerical Studies.” Materials 10, no. 10 (October 23, 2017): 1215. doi:10.3390/ma10101215.
Naseri, Farzad, Faezeh Jafari, Ehsan Mohseni, Waiching Tang, Abdosattar Feizbakhsh, and Mohsen Khatibinia. “Experimental Observations and SVM-Based Prediction of Properties of Polypropylene Fibres Reinforced Self-Compacting Composites Incorporating Nano-CuO.” Construction and Building Materials 143 (July 2017): 589–598. doi:10.1016/j.conbuildmat.2017.03.124.
Eurocode 2, Design of Concrete Structures, Part 1: General Rules and Rules for Buildings, prEN 1992-1 CEN, (2005).
Iranian National Building Codes Compilation Office. Iranian National Building Code, Part 9: Reinforced Concrete Buildings Design, Ministry of Housing and Urban Development (MHUD), (2014).
Iranian National Standardization Organization , Specification for Portland cement, No. 389, 3rd Revision. (1999),
Iranian National Building Codes Compilation Office. Iranian National Building Code, Part 9: Reinforced Concrete Buildings Design, Ministry of Housing and Urban Development (MHUD), (2014).
Iranian National Standardization Organization , concrete aggregates-Specifications, No. 302, 3rd. Revision. (2015),
Badarlou, B., A. A. Tasnimi, and M. S. Mohammadi. "Failure criteria of unreinforced grouted brick masonry based on a biaxial compression test." (2009): 502-511.
ASTM C 496/C 496M-04, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, American Standard Test Method, West Conshohocken, Penn, USA, (2004).
ASTM Standards. Standard test method for compressive strength of cylindrical concrete specimens. In: Annual Book of ASTM Standards (ASTM C 39-01). American Society for Testing and Materials, Philadelphia, 5 pp. (2001).
Schittkowski, K. “EASY-FIT: a Software System for Data Fitting in Dynamical Systems.” Structural and Multidisciplinary Optimization 23, no. 2 (March 2002): 153–169. doi:10.1007/s00158-002-0174-6.
Jafari, Faeze, Jalal Akbari, and Alireza Jahanpour. "Evaluation of Safety Index and Calibration of Load and Resistance Factors for Reinforced Concrete Beams under Bending, Shear and Torsion Demands." Journal of Structural and Construction Engineering 3, no. 4 (2017): 49-64. doi: 10.22065/jsce.2016.41237.
Akbari, Jala, and Faezeh Jafari. "Calibration of Load and Resistance Factors for Reinforced Concrete." Civil Engineering Infrastructures Journal 51, no. 1 (2018): 217-227. doi: 10.7508/ceij.2018.01.012.
DOI: 10.28991/cej-03091198
Refbacks
- There are currently no refbacks.
Copyright (c) 2018 Baitollah Badarloo, Amir Kari, Faezeh Jafari
This work is licensed under a Creative Commons Attribution 4.0 International License.