The Environmental and Sustainable Factors on the Special Economic Zones Development

Suharman Hamzah, Daisy Pangemanan, Evi Aprianti

Abstract


The process towards sustainability is indeed very complicated, given the increasing need of the population for infrastructure to support human activities. The objective of the study is to analyze the influence of environmental factors and their awful effects on infrastructure projects with sustainable construction models in special economic zones. The methodology used are mixed methods, combination of quantitative and qualitative approaches with the total respondent are 80 persons. The respondents involved are divided by company/institution, company’s qualifications, and stakeholders. The first validity shows that all factors have a value above 0.5, by using Fornell Lacker Criterion, it is found that the CDV value met the requirements from all variables involved. The validation was calculated by a cross-loading method called discriminant validity. After validity, it is continued to obtain model fit value and the final model fit is 0.568 means good model. The NFI value released was 56.8%. It means that the declared model was good enough to be implemented within sustainability in SEZs. This result supported the previous research, which stated that a sustainable construction model using a multi-criteria approach is a good model choice for the development of a sustainable construction model.

 

Doi: 10.28991/CEJ-2023-09-02-06

Full Text: PDF


Keywords


Environment; Strategy; Sustainable Construction; Special Economic Zones; Building Engineering.

References


Lima, L., Trindade, E., Alencar, L., Alencar, M., & Silva, L. (2021). Sustainability in the construction industry: A systematic review of the literature. Journal of Cleaner Production, 289, 125730. doi:10.1016/j.jclepro.2020.125730.

Zea Escamilla, E., Habert, G., & Wohlmuth, E. (2016). When CO2 counts: Sustainability assessment of industrialized bamboo as an alternative for social housing programs in the Philippines. Building and Environment, 103, 44–53. doi:10.1016/j.buildenv.2016.04.003.

Alencar, M. H., Priori, L., & Alencar, L. H. (2017). Structuring objectives based on value-focused thinking methodology: Creating alternatives for sustainability in the built environment. Journal of Cleaner Production, 156, 62–73. doi:10.1016/j.jclepro.2017.03.221.

Xu, X., Xu, P., Zhu, J., Liu, J., & Xue, Q. (2022). How to minimize the embodied environmental impact of green building envelope? An automatic optimization method. Environmental Impact Assessment Review, 93, 106732. doi:10.1016/j.eiar.2021.106732.

Aigbavboa, C., Ohiomah, I., & Zwane, T. (2017). Sustainable Construction Practices: “a Lazy View” of Construction Professionals in the South Africa Construction Industry. Energy Procedia, 105, 3003–3010. doi:10.1016/j.egypro.2017.03.743.

Oke, A. E., Aigbavboa, C. O., & Semenya, K. (2017). Energy Savings and Sustainable Construction: Examining the Advantages of Nanotechnology. Energy Procedia, 142, 3839–3843. doi:10.1016/j.egypro.2017.12.285.

Solaimani, S., & Sedighi, M. (2020). Toward a holistic view on lean sustainable construction: A literature review. Journal of Cleaner Production, 248, 119213. doi:10.1016/j.jclepro.2019.119213.

Mi, R., Pan, G., Liew, K. M., & Kuang, T. (2020). Utilizing recycled aggregate concrete in sustainable construction for a required compressive strength ratio. Journal of Cleaner Production, 276, 124249. doi:10.1016/j.jclepro.2020.124249.

Agyekum-Mensah, G., Knight, A., & Coffey, C. (2012). 4Es and 4 Poles model of sustainability: Redefining sustainability in the built environment. Structural Survey, 30(5), 426–442. doi:10.1108/02630801211288206.

Li, K., & Cheung, S. O. (2020). Alleviating bias to enhance sustainable construction dispute management. Journal of Cleaner Production, 249, 119311. doi:10.1016/j.jclepro.2019.119311.

Mohandes, S. R., & Zhang, X. (2021). Developing a Holistic Occupational Health and Safety risk assessment model: An application to a case of sustainable construction project. Journal of Cleaner Production, 291, 125934. doi:10.1016/j.jclepro.2021.125934.

Qazi, A., Shamayleh, A., El-Sayegh, S., & Formaneck, S. (2021). Prioritizing risks in sustainable construction projects using a risk matrix-based Monte Carlo Simulation approach. Sustainable Cities and Society, 65, 102576. doi:10.1016/j.scs.2020.102576.

Sánchez-Garrido, A. J., Navarro, I. J., & Yepes, V. (2022). Multi-criteria decision-making applied to the sustainability of building structures based on Modern Methods of Construction. Journal of Cleaner Production, 330, 129724. doi:10.1016/j.jclepro.2021.129724.

Sharma, S., & Kumar Sharma, N. (2022). Advanced materials contribution towards sustainable development and its construction for green buildings. Materials Today: Proceedings. doi:10.1016/j.matpr.2022.07.394.

Det Udomsap, A., & Hallinger, P. (2020). A bibliometric review of research on sustainable construction, 1994–2018. Journal of Cleaner Production, 254, 120073. doi:10.1016/j.jclepro.2020.120073.

Murtagh, N., Scott, L., & Fan, J. (2020). Sustainable and resilient construction: Current status and future challenges. Journal of Cleaner Production, 268, 122264. doi:10.1016/j.jclepro.2020.122264.

Liu, H., Sydora, C., Altaf, M. S., Han, S. H., & Al-Hussein, M. (2019). Towards sustainable construction: BIM-enabled design and planning of roof sheathing installation for prefabricated buildings. Journal of Cleaner Production, 235, 1189–1201. doi:10.1016/j.jclepro.2019.07.055.

Rajabi, S., El-Sayegh, S., & Romdhane, L. (2022). Identification and assessment of sustainability performance indicators for construction projects. Environmental and Sustainability Indicators, 15, 100193. doi:10.1016/j.indic.2022.100193.

Pelli, P. (2021). Service innovation and sustainable construction: Analyses of wood vis-à-vis other construction projects. Cleaner Engineering and Technology, 2, 100061. doi:10.1016/j.clet.2021.100061.

El-Mahdy, D., Gabr, H. S., & Abdelmohsen, S. (2021). SaltBlock as a 3D printed sustainable construction material in hot arid climates. Journal of Building Engineering, 43, 103134. doi:10.1016/j.jobe.2021.103134.

Negash, Y. T., Hassan, A. M., Tseng, M. L., Wu, K. J., & Ali, M. H. (2021). Sustainable construction and demolition waste management in Somaliland: Regulatory barriers lead to technical and environmental barriers. Journal of Cleaner Production, 297, 126717. doi:10.1016/j.jclepro.2021.126717.

Pham, H., & Kim, S. Y. (2019). The effects of sustainable practices and managers’ leadership competences on sustainability performance of construction firms. Sustainable Production and Consumption, 20, 1–14. doi:10.1016/j.spc.2019.05.003.

Li, Y., Gu, Y., & Liu, C. (2018). Prioritising performance indicators for sustainable construction and development of university campuses using an integrated assessment approach. Journal of Cleaner Production, 202, 959–968. doi:10.1016/j.jclepro.2018.08.217.

Hashmi, A. F., Shariq, M., & Baqi, A. (2021). An investigation into age-dependent strength, elastic modulus and deflection of low calcium fly ash concrete for sustainable construction. Construction and Building Materials, 283, 122772. doi:10.1016/j.conbuildmat.2021.122772.

Ristić, V., Maksin, M., Nenković-Riznić, M., & Basarić, J. (2018). Land-use evaluation for sustainable construction in a protected area: A case of Sara mountain national park. Journal of Environmental Management, 206, 430–445. doi:10.1016/j.jenvman.2017.09.080.

Vugec, D. S., Pejic-Bach, M., & Spremić, M. (2019). IT Strategic Grid: A Longitudinal Multiple Case Study. Handbook of Research on Contemporary Approaches in Management and Organizational Strategy. IGI Global, Hershey, United States. doi:10.4018/978-1-5225-6301-3.ch006

Ranjetha, K., Alengaram, U. J., Alnahhal, A. M., Karthick, S., Zurina, W. J. W., & Rao, K. J. (2022). Towards sustainable construction through the application of low carbon footprint products. Materials Today: Proceedings, 52, 873–881. doi:10.1016/j.matpr.2021.10.275.


Full Text: PDF

DOI: 10.28991/CEJ-2023-09-02-06

Refbacks

  • There are currently no refbacks.




Copyright (c) 2023 Suharman Hamzah

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.
x
Message