Evolution and Implications of Changes in Seismic Load Codes for Earthquake Resistant Structures Design
Abstract
Doi: 10.28991/CEJ-2024-010-01-04
Full Text: PDF
Keywords
References
Boen, T., Wangsadinata, W. (1971). A Brief Outline of Seismicity and Earthquake engineering Problems in Indonesia. LPMB, Jakarta, Indonesia.
N.I-18:1970. (1969). Indonesian Loading Code. Foundation for the Research Institute for Building Problems, Indonesian Standard Code, Bandung, Indonesia. (In Indonesian).
Otani, S. (2004). Earthquake Resistant Design of Reinforced Concrete Buildings. Journal of Advanced Concrete Technology, 2(1), 3–24. doi:10.3151/jact.2.3.
Dhakal, R. P. (2011). Structural design for earthquake resistance: Past, present and future. Canterbury Earthquakes Royal Commission, 22 February, 2011, Christchurch, New Zealand.
Leimena, S. L. (1979). Disaster in Bali Caused by Earthquake 1976 (A Report). Disasters, 3(1), 85–87. doi:10.1111/j.1467-7717.1979.tb00203.x
Indonesian Standard Code. (1981). Indonesian Earthquake Resistant Design Regulations for Buildings. Building Problem Research Institute, Jakarta, Indonesia.
SNI 03–1726-2002. (2002). Earthquake Resistance Design Procedures for House and Building. National Standardization Agency of Indonesia, Jakarta, Indonesia. (In Indonesian).
SNI 1726–2012. (2012). Earthquake Resistance Design Procedures for Building and Non-Building Structures. National Standardization Agency of Indonesia, Jakarta, Indonesia. (In Indonesian).
SNI 1726–2019. (2019). Earthquake Resistance Design Procedures for Building and Non-Building Structures. National Standardization Agency of Indonesia, Jakarta, Indonesia. (In Indonesian).
Afriadi, Y, & Satyarno, I. (2013). Comparison of Design Spectra of several Big Cities in Indonesia in the 2012 Earthquake SNI and 2002 Earthquake SNI. National Conference on Civil Engineering 7 (KoNTekS 7), 24-26 October, 2013, Surakarta, Indonesia. (In Indonesian).
Sengara, I. W., & Aldiamar, F. (2021). Assessment on earthquake resistance spectral design load criteria for buildings and infrastructures in Indonesia. E3S Web of Conferences, 331, 07009. doi:10.1051/e3sconf/202133107009.
Nugroho, W. O., Sagara, A., & Imran, I. (2022). The evolution of Indonesian seismic and concrete building codes: From the past to the present. Structures, 41, 1092–1108. doi:10.1016/j.istruc.2022.05.032.
Faizah, R., & Saputra, E. (2018). Seismic Demand Due to the Earthquake Hazard Map 2017 Determination in Indonesia. Proceedings of the 7th Engineering International Conference on Education, Concept and Application on Green Technology. doi:10.5220/0009007101080116.
Faizah, R., & Amaliah, R. (2021). Comparative Study of Indonesian Spectra Response Parameters for Buildings According To 2012 and 2019 Seismic Codes. International Journal of Integrated Engineering, 13(3). doi:10.30880/ijie.2021.13.03.020.
Nugroho, N. S., Erizal, & Putra, H. (2021). Structure evaluation of building based on the earthquake response acceleration spectrum of the SNI 03-1726-2019. IOP Conference Series: Earth and Environmental Science, 871(1), 012013. doi:10.1088/1755-1315/871/1/012013.
Sutjipto, S., & Sumeru, I. (2021). Anomaly Phenomena on the New Indonesian Seismic Code SNI 1726:2019 Design Response Spectra. ICCOEE2020&2021. Lecture Notes in Civil Engineering, 132, Springer, Singapore. doi:10.1007/978-981-33-6311-3_43.
Partono, W., Irsyam, M., Nazir, R., Asrurifak, M., & Sari, U. C. (2022). Site Coefficient and Design Spectral Acceleration Evaluation of New Indonesian 2019 Website Response Spectra. International Journal of Technology, 13(1), 115. doi:10.14716/ijtech.v13i1.4132.
Tampubolon, S., Simanjuntak, P., Tarapandjang, G. P., & I Putu Ellsa Sarassantika. (2023). The Performance Analysis of High-Rise Building Structure Based on SNI 03-1726-2012 & SNI 03-1726-2019 (Case Study: Tower 1 Transit-Oriented Development Apartment Pondok Cina, Depok). Journal of Infrastructure Planning and Engineering (JIPE), 2(1), 36–41. doi:10.22225/jipe.2.1.2023.36-41.
SKBI 2.3.53.1987/UDC 693.55.693.25. (1987). Design Instructions for Reinforced Concrete and Reinforced Wall Structures for House and Building. Public Works Publishing Agency Foundation, Jakarta, Indonesia. (In Indonesian).
Indonesian Standard Code. (1983). Indonesian Earthquake Resistant Design Provisions Code for Building. Foundation for the Research Institute for Building Problems, Jakarta, Indonesia. (In Indonesian).
Fraser, I. A. N. (1983). A new draft code for seismic design of buildings in Indonesia. Bulletin of the New Zealand Society for Earthquake Engineering, 16(3), 247–254. doi:10.5459/bnzsee.16.3.247-254.
SNI 03–1726-1989. (1989). Earthquake Resistance Design Guideline for House and Building. National Standardization Agency of Indonesia, Jakarta, Indonesia. (In Indonesian).
UBC-97. (1997). Uniform Building Code Volume 2 Structural Engineering Design Provision. International Conference of Building Officials, Whittier, United States.
Irsyam, M., Hendriyawan, Asrurifak, M., Ridwan, M., Aldiamar, F., Sengara, I. W., ... & Firmanti, A. (2013). Past earthquakes in Indonesia and new seismic hazard maps for earthquake design of buildings and infrastructures. Geotechnical Predictions and Practice in Dealing with Geohazards, Springer, Dordrecht, Netherlands. doi:10.1007/978-94-007-5675-5_3.
Sengara, I. W., Irsyam, M., Sidi, I. D., Mulia, A., Asrurifak, M., & Hutabarat, D. (2015). Development of earthquake risk-targeted ground motions for Indonesian Earthquake Resistance Building Code SNI 1726-2012. International Conference on Applications of Statistics and Probability, 12-15, 2015, Vancouver, Canada.
ASCE 7–10. (2010). Minimum Design Loads for Buildings and Other Structures. American Society of Civil Engineers. Reston, United States. doi:10.1061/9780784412916.
Luco, N., Ellingwood, B. R., Hamburger, R. O., Hooper, J. D., Kimball, J. K., & Kircher, C. A. (2007). Risk-targeted versus current seismic design maps for the conterminous United States. SEAOC 2007 Convention Proceedings, 26-29 September, 2007, Squaw Creek, United States.
FEMA P-749. (2010). Earthquake-Resistant Design Concepts, an Introduction to the NEHRP Recommended Seismic Provisions for New Buildings and Other Structures. National Institute of Building Sciences Building Seismic Safety Council Washington, United States.
Power, M., Chiou, B., Abrahamson, N., Bozorgnia, Y., Shantz, T., & Roblee, C. (2008). An Overview of the NGA Project. Earthquake Spectra, 24(1), 3–21. doi:10.1193/1.2894833.
Sengara, I. W., & Aldiamar, F. (2021). Assessment on earthquake resistance spectral design load criteria for buildings and infrastructures in Indonesia. E3S Web of Conferences, 331, 07009. doi:10.1051/e3sconf/202133107009.
Nugroho, W. O., Sagara, A., & Imran, I. (2022). The evolution of Indonesian seismic and concrete building codes: From the past to the present. Structures, 41, 1092–1108. doi:10.1016/j.istruc.2022.05.032.
ASCE 7–16. (2017). Minimum Design Loads and Associated Criteria for Buildings and Other Structures. American Society of Civil Engineers. Reston, United States. doi:10.1061/9780784414248.
Boore, D. M., Stewart, J. P., Seyhan, E., & Atkinson, G. M. (2014). NGA-West2 Equations for Predicting PGA, PGV, and 5% Damped PSA for Shallow Crustal Earthquakes. Earthquake Spectra, 30(3), 1057–1085. doi:10.1193/070113eqs184m.
Campbell, K. W., & Bozorgnia, Y. (2014). NGA-West2 Ground Motion Model for the Average Horizontal Components of PGA, PGV, and 5% Damped Linear Acceleration Response Spectra. Earthquake Spectra, 30(3), 1087–1115. doi:10.1193/062913eqs175m.
Chiou, B. S.-J., & Youngs, R. R. (2014). Update of the Chiou and Youngs NGA Model for the Average Horizontal Component of Peak Ground Motion and Response Spectra. Earthquake Spectra, 30(3), 1117–1153. doi:10.1193/072813eqs219m.
Stewart, J. P., & Seyhan, E. (2013). Semi-empirical nonlinear site amplification and its application in NEHRP site factors. Pacific Earthquake Engineering Research Center, University of California, Berkeley, United States.
FEMA P-749. (2022). Earthquake-Resistant Design Concepts an Introduction to Seismic Provisions for New Buildings. Second Edition 2022. National Institute of Building Sciences Building Seismic Safety Council Washington, United States.
FEMA 450. (2004). NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures. Part 1. National Institute of Building Sciences Building Seismic Safety Council Washington, United States.
ACI 318-19. (2019). Standard Building Code Requirements for Structural Concrete-Commentary on Building Code Requirements for Structural Concrete. American Concrete Institute (ACI), Farmington Hills, United States.
Uang, C. M. (1991). Establishing R (or R w) and C d factors for building seismic provisions. Journal of structural Engineering, 117(1), 19-28. doi:10.1061/(ASCE)0733-9445(1991)117:1(19).
Mwafy, A. M., & Elnashai, A. S. (2002). Calibration of Force Reduction Factors of RC Buildings. Journal of Earthquake Engineering, 6(2), 239–273. doi:10.1080/13632460209350416.
Uang, C. (1991). Comparison of seismic force reduction factors used in U.S.A. and Japan. Earthquake Engineering, Structural Dynamics, 20(4), 389–397. Portico. doi:10.1002/eqe.4290200407.
Paulay, T., & Priestley, M. N. (1992). Seismic design of reinforced concrete and masonry buildings. John Wiley & Sons, Hoboken, United States. doi:10.1002/9780470172841.
Miranda, E., & Bertero, V. V. (1994). Evaluation of Strength Reduction Factors for Earthquake-Resistant Design. Earthquake Spectra, 10(2), 357–379. doi:10.1193/1.1585778.
Whittaker, A., Hart, G., & Rojahn, C. (1999). Seismic Response Modification Factors. Journal of Structural Engineering, 125(4), 438–444. doi:10.1061/(asce)0733-9445(1999)125:4(438).
Elnashai, A. S., & Mwafy, A. M. (2002). Overstrength and force reduction factors of multistorey reinforced‐concrete buildings. The Structural Design of Tall Buildings, 11(5), 329–351. doi:10.1002/tal.204.
Structural Engineers Association of California (SEAOC). (2009). Seismic Design Recommendations Compilation Seismology Committee Structural Engineers Association of California. Structural Engineers Association of California (SEAOC), Sacramento, United States.
Elnashai, A. S., & Di Sarno, L. (2015). Fundamentals of earthquake engineering: from source to fragility. John Wiley & Sons, Hoboken, United States.
Malhotra, P. K. (2005). Return Period of Design Ground Motions. Seismological Research Letters, 76(6), 693–699. doi:10.1785/gssrl.76.6.693.
Goel, R. K., & Chopra, A. K. (1997). Vibration properties of buildings determined from recorded earthquake motions. Berkeley: Earthquake Engineering Research Center, University of California, University of California, Berkeley, United States.
FEMA 302. (1997). NEHRP Recommend Provision for Seismic Regulation for New Building. National Institute of Building Sciences Building Seismic Safety Council Washington, United States.
Xiaoguang, C., Jingshan, B., Youwei, S., Jianyi, Z., & Yudong, Z. (2012). Comparison of seismic fortification criterion of eight Asian countries. 15th World Conference on Earthquake Engineering, 24-28 September, 2012, Lisbon, Portugal.
NZS 1170.5:2004. (2004). Structural Design Actions and Commentary, Part 5, Earthquake Actions. Standard New Zealand, Wellington, New Zealand.
EN 1998-1. (2004). Design for Structures for Earthquake Resistance, Part 1: General Rules, Seismic Actions and Rules for Buildings. European Committee for Standardization (CEN), Brussels, Belgium.
Seed, H. B., Ugas, C., & Lysmer, J. (1976). Site-dependent spectra for earthquake-resistant design. Bulletin of the Seismological Society of America, 66(1), 221–243. doi:10.1785/bssa0660010221.
Mohraz, B., & Sadek, F. (2001). Earthquake Ground Motion and Response Spectra. The Seismic Design Handbook. Springer, Boston, United States. doi:10.1007/978-1-4615-1693-4_2.
Pitilakis, K., Riga, E., & Anastasiadis, A. (2012). Design spectra and amplification factors for Eurocode 8. Bulletin of Earthquake Engineering, 10(5), 1377–1400. doi:10.1007/s10518-012-9367-6.
Pitilakis, K., Riga, E., & Anastasiadis, A. (2013). New code site classification, amplification factors and normalized response spectra based on a worldwide ground-motion database. Bulletin of Earthquake Engineering, 11(4), 925–966. doi:10.1007/s10518-013-9429-4.
Kim, D.-K., Park, H.-G., & Sun, C.-G. (2019). Design Earthquake Response Spectrum Affected by Shallow Soil Deposit. Advances in Civil Engineering, 2019, 1–18. doi:10.1155/2019/4079217.
Cubrinovski, M., & McCahon, I. (2011). Foundations on deep alluvial soils. Technical Report Prepared for the Canterbury Earthquakes Royal Commission, University of Canterbury, Christchurch, New Zealand.
Dhakal, R. P., Lin, S.-L., Loye, A. K., & Evans, S. J. (2013). Seismic design spectra for different soil classes. Bulletin of the New Zealand Society for Earthquake Engineering, 46(2), 79–87. doi:10.5459/bnzsee.46.2.79-87.
Leyendecker, E. V., Hunt, R. J., Frankel, A. D., & Rukstales, K. S. (2000). Development of Maximum Considered Earthquake Ground Motion Maps. Earthquake Spectra, 16(1), 21–40. doi:10.1193/1.1586081.
Luo Kaihai, W. Y. (2006). Research on conversion relationships among the parameters of ground motions seismic design codes of China, America and Europe. Building Structure, 36(8), 103-107.
Carvalho E, C. (2011). Overview of Eurocode 8 (Background and Applications). Eurocode, Brussels, Belgium. Available online https://eurocodes.jrc.ec.europa.eu/sites/default/files/2022-06/S1_EC8-Lisbon_E%20CARVALHO.pdf (accessed on December 2023).
Beer, M., Kougioumtzoglou, I. A., Patelli, E., & Au, S. K. (Eds.). (2015). Encyclopedia of Earthquake Engineering. Berlin/Heidelberg, Germany, Springer. doi:10.1007/978-3-642-35344-4.
DOI: 10.28991/CEJ-2024-010-01-04
Refbacks
- There are currently no refbacks.
Copyright (c) 2024 AHMAD SYARIF SUKRI

This work is licensed under a Creative Commons Attribution 4.0 International License.