Evaluation of Various Brands of Moisture Meters in Gypsum and Wood Substrates at a Range of Moisture Contents

Abel Crean

Abstract


Determining correct moisture content of wetted building materials and analysis of corresponding locations, orientations, and patterns is of imminent value to Forensic Engineers and building scientists. As many building damages relate to insurance claims and construction defect/ subrogation lawsuits, legal challenges to the accuracy of measured moisture content have arisen. The objective of this study was to independently establish the level of precision of common moisture meters used to quantify and measure moisture content in building components. The study tested four different brand moisture meters in gypsum and wood substrates at normal, high, and saturated moisture contents. The results were compared against laboratory obtained moisture content to assess the accuracy of each meter in the substrate and at which moisture content range.

The study wetted wood and gypsum specimens to moderate and saturated conditions and measured the resulting moisture content with the four different brands of meters. Control wood and gypsum specimens were not exposed to water and their moisture content was measured as is. All of the wood and gypsum specimens were subsequently sent to a laboratory and moisture content was calculated by the oven-dry method. The moisture content results measured by moisture meters were compared against the laboratory obtained data. Data was averaged and plotted with moisture content of various specimens and visually analysed to determine which meters deviated from the laboratory data and at which moisture contents. Data was also numerically analysed and graphed to quantify meter moisture content accuracy as compared to laboratory obtained moisture content.

Moisture meters should be used within the manufacturer specified range of moisture content and price may not be the best indicator of moisture meter accuracy.  At low ranges of moisture content in wood and gypsum, all meters exhibited relatively small deviation from laboratory calculated values, while moderate and saturated conditions presented larger variations from laboratory moisture content. Composite materials such as gypsum may be difficult to establish moisture content, as different materials such as the gypsum core and paper facing absorb and distribute moisture differently. All meters were successful in detecting wet conditions, but exhibited a lack of precision in determining exact values in moderate and saturated conditions. In this regard, meters may be improved as the industry demands not only detecting wet conditions but determining precise values at a full range of moisture contents. Future studies may be limited to monolithic materials as oven dry method returns an average value of the respective paper and gypsum components in gypsum board specimens, and thus contained an inherent margin of error.


Keywords


Forensic Engineering ; Building Science; Material Science; Moisture Meter; Water Exposure; Building Materials; Duration of Loss; Wood; Gypsum Board; Drywall; Sheetrock; Roof Leak; Plumbing Leak; Insurance Claim.

References


Bitsuamlak, Girma T., Arindam Gan Chowdhury, and Dhawal Sambare. "Application of a full-scale testing facility for assessing wind-driven-rain intrusion." Building and Environment 44, no. 12 (2009): 2430-2441.

Baheru, Thomas, Arindam Gan Chowdhury, Girma Bitsuamlak, and Ali Tokay. "A parametric representation of wind-driven rain in experimental setups." In Advances in Hurricane Engineering: Learning from Our Past, pp. 270-282. 2013.

Baheru, Thomas, Arindam Gan Chowdhury, Girma Bitsuamlak, Forrest J. Masters, and Ali Tokay. "Simulation of wind-driven rain associated with tropical storms and hurricanes using the 12-fan Wall of Wind." Building and Environment 76 (2014): 18-29.

Amir-sayyafi, Ehssan, A. G. Chowdhury, and A. Mirmiran. "A supper Lightweight Hurrican-Resistant Thin-Walled Box-cell Roofing System." In International Symposium on Structural Engineering. (2016): 698-704.

Sayyafi, E. A., Gan Chowdhury, A., & Mirmiran, A. An Innovative Hurricane-Resistant UHPC Roof System. Journal of Architectural Engineering, (2017). In Press.

561 BUILD (2017). Retrieved from https://sites.google.com/view/561build/home/wood-decay-termite

Gypsum Association. “Gypsum through the ages.” (2012) Web. Retrieved from https://www.gypsum.org/about/gypsum-101/history-gypsum/

Delmhorst Instrument Co. “J-4 Owner’s Manual”. Jan (2006) Web. Retrieved from http://www.homedepot.com/catalog/pdfImages/8a/8a4666d4-0dba-4c63-ab30-c7ffe94eb9c8.pdf

Delmhorst Instrument Co. “Building Inspection FAQs” July (2017) Web. Retrieved from http://www.delmhorst.com/FAQs/Building-Inspection

Rhoades, J.D. Raats, P.A.C. Prather, R.J. “Effects of liquid phase electrical conductivity, water content, and surface conductivity on bulk soil electrical conductivity.” Alliance of Crop, Soil, and Environmental Science Societies 40 (2013): 651-655

Kitzio, F. Campbell, C.S. Campbell, G.S. Cobos, D.R. Teare, B.L. Carter, B. Hopmans, J. W. “Frequency, electrical conductivity and temperature analysis of a low-cost capacitance soil moisture sensor. Journal of Hydrology 352 (2008): 367-378.

Reeb, Jim. Milota, Mike. “Moisture content by the oven dry method.” Oregon State University. (2012): 1

Ahmad, I., N. Suksawang, K. Sobhan, J. Corven, E. A. Sayyafi, S. Pant, and F. Martinez. "Develop Epoxy Grout Pourback Guidance and Test Methods to Eliminate Thermal." Shrinkage Cracking at Post-Tensioning Anchorages: Phase II (2015).

Ghasemi, Sahar, Pedram Zohrevand, Amir Mirmiran, Yulin Xiao, and Kevin Mackie. "A super lightweight UHPC–HSS deck panel for movable bridges." Engineering Structures 113 (2016): 186-193.


Full Text: PDF

DOI: 10.21859/cej-03091

Refbacks

  • There are currently no refbacks.




Copyright (c) 2017 Abel Crean

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.
x
Message