The Influence of Moisture on the Frequency Spectrum of Time Varying Mass Engineering Structure

Phung Tu, Vanissorn Vimonsatit, Chayanon Hansapinyo

Abstract


The frequencies of time-varying mass systems have not been commonly studied in engineering structures as the rate of mass change is generally small compared to the mass of the overall structure. For silos of granular materials, the total mass of the stored granules can be relatively high compared to the mass of the silo structure. During the flow-in or flow-out of granules, the silo system behaves as a time-varying mass system. Minor changes to the moisture content ratio of the granules can cause their flow characteristics to change. The influence of the moisture content ratio of the granular material inside a cylindrical silo is investigated in this paper using Variational Mode Decomposition, Hilbert Transform, and Hilbert Marginal Spectrum processing methods. The results show that the amplitude and frequency of vibration vary with the change in the moisture content ratio of the stored materials and across different cycles, despite all influencing parameters being kept constant. Such variations in the response of the structure mean that the loads also vary according to the principles of engineering mechanics. The outcomes of this research can be further developed into a diagnostic tool to conditionally monitor the structural integrity of the overall silo structure and flow characteristics automatically.

 

Doi: 10.28991/CEJ-2023-09-01-02

Full Text: PDF


Keywords


HMS; VMF; VMD; HT; Frequency Spectrum; Time Varying Mass Civil Engineering Structure; Moisture Content Ratio.

References


Cliff, A., Fullard, L. A., Breard, E. C. P., Dufek, J., & Davies, C. E. (2021). Granular size segregation in silos with and without inserts. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 477(2245). doi:10.1098/rspa.2020.0242.

Abdullah, M. S. M., Rahiman, M. H. F., Zakaria, A., Kamarudin, L. M., & Mohamed, L. (2019). A Review on Moisture Measurement Technique in Agricultural Silos. IOP Conference Series: Materials Science and Engineering, 705(1), 12001. doi:10.1088/1757-899X/705/1/012001.

Vimonsatit, V., Tu, P., & Fletcher, J. (2022). A Consideration of the Structural Integrity of Time-Varying Mass Systems. American Concrete Institute, ACI Special Publication, SP-351, 38–53. doi:10.14359/51734673.

Xu, Z., & Liang, P. (2022). Modified lateral pressure formula of shallow and circular silo considering the elasticities of silo wall and storage materials. Scientific Reports, 12(1), 7069. doi:10.1038/s41598-022-11305-6.

Tu, P. (2017). Dynamic Response of Silo Supporting Structure under Pulsating Loads. PhD Thesis, Curtin University, Bentley, Australia.

Tu, P., Vimonsatit, V., & Li, J. (2018). Silo quake response spectrum of iron ore train load out bin. Advanced Powder Technology, 29(11), 2775–2784. doi:10.1016/j.apt.2018.07.026.

Tu, P., Vimonsatit, V., & Hansapinyo, C. Frequency spectrum of engineering structures with time varying masses. Journal of Infrastructure Preservation and Resilience, 3(1), 15. doi:10.1186/s43065-022-00059-0.

AS/NZS1170.4. (2007). Structural design actions Part 4: Earthquake actions. Standards Australia, Sydney, Australia.

AS2304. (2019). Water storage tanks for fire protection systems. Standards Australia, Sydney, Australia.

Asencio, K., Acevedo, M., Zuriguel, I., & Maza, D. (2017). Experimental Study of Ordering of Hard Cubes by Shearing. Physical Review Letters, 119(22), 228002. doi:10.1103/PhysRevLett.119.228002.

Dragomiretskiy, K., & Zosso, D. Variational Mode Decomposition. IEEE Transactions on Signal Processing, 62(3), 531–544. doi:10.1109/TSP.2013.2288675.

Isham, M. F., Leong, M. S., Lim, M. H., & Ahmad, Z. A. Variational mode decomposition: mode determination method for rotating machinery diagnosis. Journal of Vibroengineering, 20(7), 2604–2621. doi:10.21595/jve.2018.19479.

Griffiths, J. (2018). Impact of Moisture Content on the Dynamic Response of a Silo Model Wall during Discharge. Bachelor of Engineering, Curtin University, Bentley, Australia.

AS1289.3.6.1. (2009). Methods of testing soils for engineering purposes - Soil classification tests - Determination of the particle size distribution of a soil – Standard method of analysis by sieving. Standards Australia, Sydney, Australia.

AS1289.2.1.1. (2005). Methods of testing soils for engineering purposes - Soil classification tests - Determination of the moisture content of a soil – Oven drying method. Standards Australia, Sydney, Australia.


Full Text: PDF

DOI: 10.28991/CEJ-2023-09-01-02

Refbacks

  • There are currently no refbacks.




Copyright (c) 2022 Phung Tu, Vanissorn Vimonsatit, Chayanon Hansapinyo

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.
x
Message