The Consideration of Response Modification Factor of L-Shaped Structures by Using Adaptive Pushover Analysis Method and Comparison with Traditional Pushover Method

Azin Akbari, Erfan Ordookhani, Mohammad Reza Pasaeian

Abstract


In the most of regulations, reduction factor of seismic force depends only on the kind of lateral loading system, but research has shown that this factor is a function of many factors such as period and modal characteristics of the structure, the height and especially form of plan in the building. Due to the complexity of nonlinear dynamic analysis method, today, nonlinear static analysis method called pushover, as a practical appropriate tool has developed in field of earthquake engineering based on function frequently. But traditional pushover analysis method have defects that can be noted Including the stability of lateral load pattern form, did not consider the impact of higher modes or impact of more efficient modes and lack of consideration of the stiffness matrix of member or the entire of structure changes in step of analysis. In recent years a number of researchers have proposed using adaptive load pattern, in this methods, lateral load pattern have changed and adapting in during analysis based on momentary stiffness matrix of structures. In this paper we investigate the response modification factor in L-shaped geometric asymmetry by using SAP software, Pushover analysis used in this study is divided into two categories pushover with constant load pattern (traditional method) and pushover with the adaptive load pattern (adaptive). So, it is studied building with L-shaped asymmetrical plan, with moment frame double structural system - bracing and number of floors 5, 10, 15 and 20, with four different bracing plan types at considering frames, and the end were compared obtained response modification factor from the two methods for these buildings.


Keywords


Geometric Asymmetry; L-Shaped Plan; Response Modification Factor; Adaptive Pushover; Adaptive Load Pattern.

References


Razavizadeh, S.M.B and Etemdi, M. "The impacts geometry form and L- shaped irregular structures architecture structures on its behavior against earthquake. 6th National Congress on Civil Engineering. (2011). https://doi.org/10.1007/978-94-007-5377-8_11.

“Design regulation of the buildings against earthquakes”, Standard 84-2800, Edition 3, the nineteenth edition, spring. (2014). https://doi.org/10.1201/9781315273440.

“Building and Housing Research Center”, the regulation of, buildings design against earthquakes, Tehran. (1999). https://doi.org/10.6028/nbs.bss.48.

Arab Pour, F. Masoudzadeh, S.A. “The regular and irregular Buildings in plan and height (survey and analysis in during of the earthquake)". 12th Civil Engineering Student Conference. (2005). https://doi.org/10.7712/120115.3659.1317.

Chhopra, A.K and Goel, R.K. "A modal Pushover Procedure to estimate seismic demands for buildings": Summery and evaluation "fifth National conference on Earthquake 26-30 may 2003, Istanbul, Turkey, Keynot Lecture. (2003). https://doi.org/10.1002/eqe.380.

Chiguee, M. “Thesis on studying the response modification factor and seismic behavior of combined steel concrete frames by adaptive pushover analysis method (APA)”. (2006) https://doi.org/10.1016/j.jcsr.2012.07.010.

Uang, C. -M., "Establishing R (or RW) and Cd Factors for Building seismic Provisions". J. Of struct. Engrg, ASCE, 117 (1991): 19-28. https://doi.org/10.1061/(asce)0733-9445(1991)117:1(19).

FMEA, “NEHRP Guidelines for the Seismic Rehabilitation of Buildings”, FMEA 273, (1997). https://doi.org/10.1007/978-3-663-08408-2_4.

Mohammadi Sahabi, M. "Effect of frequency time and addition to demand seismic- non-elastic resistance reinforced concrete moment frames", thesis phd, University Torbat-e Modarres of Tehran. (1997). https://doi.org/10.1002/tal.1168.

Uang, C. M. "Establishing R (or Rw) and Cd factors for building seismic privisions", Journal of Engineering, ASME 117, (1992): 19-28. https://doi.org/10.1061/(asce)0733-9445(1991)117:1(19).

Zahraei, SM. “The consideration of proposed response modification factor of Regulations in designing the concrete by Fulcrum of thermal expansion (neoprene)” Journal of Transportation, 9, (2012). https://doi.org/10.14359/8547.

Sadegh Azar, M and Ghafouri, M. "calculation factor the steel coaxial braced structures response modification factor". Scientific-Research Sharif Journal. 14, 2007: 22-35. https://doi.org/10.12989/scs.2015.18.1.165.


Full Text: PDF

DOI: 10.28991/cej-03091130

Refbacks

  • There are currently no refbacks.




Copyright (c) 2018 Azin Akbari, Erfan Ordookhani, Mohammad Reza Pasaeian

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.
x
Message