Generalized Review on EVD and Constraints Simplex Method of Materials Properties Optimization for Civil Engineering

Kennedy C Onyelowe, George Alaneme, Duc Bui Van, Manh Nguyen Van, Charles Ezugwu, Talal Amhadi, Felix Sosa, Francis Orji, Benjamin Ugorji

Abstract


Extreme vertex design (EVD) has been adapted to be used in the modeling of the behavior of mixture experiments in civil engineering. This method has been in use since the 1970s and has be prevalent in the field of medical science. Various other methods of design of experiments have been used in engineering but neither has EVD being used particularly in civil engineering. This review is presented to serve as a hub or guide for subsequent exercise where concrete production, asphalt production or modification, soils stabilization and concrete improvement or water treatment would be studied with the help EVD. Its ability to fix design points and centroids has been reviewed in this work. EVD operates with various algorithms and depends on the order or condition of problems to be solved. The XVERT algorithm working on Minitab and Design Expert platform was adopted in this review work because of its efficiency in handling quadratic model problems like the four cases reviewed in the present work. From the four special cases, it can be asserted that there is a confidence in the use of EVD to develop the constraints, design the experimental factor space, design the mix proportions, and validate the models resulting from these procedures after experimental specimens are tested to determine the responses.


Keywords


Extreme Vertex Design; MATLAB-MINITAB-DesignExpert; Optimization; CONSIM Algorithms; XVERT and XVERT1 Algorithms; Soil-Concrete-Asphalt-Water Treatment; Constraints Simplex Experimental Region.

Full Text:

PDF

References


Smith, W. F. Experimental design for formulation. American Statistical Association and Society for Industrial and Applied Mathematics, USA. 1931.

Cornell, John, Experiments with Mixtures: Designs, Models, and the Analysis of Mixture Data, JohnWiley & Sons, Inc. New York. 2002.

Snee, Ronald D. “Experimental Designs for Mixture Systems with Multicomponent Constraints.” Communications in Statistics - Theory and Methods 8, no. 4 (January 1979): 303–326. doi:10.1080/03610927908827762.

McLean, R. A., and V. L. Anderson. “Extreme Vertices Design of Mixture Experiments.” Technometrics 8, no. 3 (August 1966): 447–454. doi:10.1080/00401706.1966.10490377.

Scheffé, H. Experiments with mixtures. Journal of the Royal Statistical Society Series B. 20, (1958), 344-360.

W. Wangkananon, C. Phuaksaman, T. Koobkokkruad and S. Natakankitkul. An Extreme Vertices Mixture Design Approach to Optimization of Tyrosinase Inhibition Effects. Engineering Journal, vol. 22 (1), 2018. doi:10.4186/ej.2018.22.1.175.

T. W. Samadhi, W. Wulandari, M. I. Prasetyo, M. R. Fernando, and A. Purbasari. Synthesis of Geopolymer from Biomass-Coal Ash Blends. Green Construction and Engineering Education for Sustainable Future, AIP Conf. Proc. 1887, 020031-1–020031-7; 2017. doi: 10.1063/1.5003514.

H. Siswanto, B. Supriyanto, Pranoto, and P. R. Chandra, A. R. Hakim. Marshall Properties of asphalt concrete using crumb rubber modified of motorcycle tire waste. Green Construction and Engineering Education for Sustainable Future, AIP Conf. Proc. 1887, 020039-1–020039-5; 2017. doi: 10.1063/1.5003522.

O. K. Wattimena, Antoni and D. Hardjito. A Review on the Effect of Fly Ash Characteristics and Their Variations on the Synthesis of Fly Ash Based Geopolymer. Green Construction and Engineering Education for Sustainable Future, AIP Conf. Proc. 1887, 020041-1–020041-12; 2017. doi: 10.1063/1.5003524.

Abubakar, B. H., Putrajaya, R. and Abdulaziz, H., “Malaysian Rice Husk – Improving the Durability and Corrosion Resistance of Concrete: Pre-Review”, Vol. 1 (1), 2010, pp. 6-13.

Chao-Lung, H., Anh-Tuan, B. L., and Chun-Tsun, C. Effect of RHA on the strength and durability characteristics of concrete. Construction and Building Materials, vol. 24 (9), 2011, pp. 3768-3772. doi: 10.1016/j.conbuildmat.2011.04.009

Gartner, E. Industrial interesting approaches to low-CO2 cements. Cement and Concrete Research, 34, 2004, pp. 1489–98.

Goltermann, P., Johansen, V. and Palbol, L., “Packing of aggregates: an alternative tool to determine the optimal aggregate mix”, ACI Mat. J. 94(5), 1997, pp. 435-443.

Mehta, P.K., "High-performance, high-volume fly ash concrete for sustainable development", Proceedings of the International Workshop on Sustainable Development and Concrete Technology, Beijing, China, May 20–21, 2004.

M. Zhang, and V. M. Malhotra, “High-Performance Concrete Incorporating Rice Husk Ash as a Supplementary Cementing Material”, ACI Materials Journal, November-December 1996, Tittle no. 93-M72, pp. 629-636.

Oyekan, G. L. and Kamiyo, O. M., “Effect of Nigerian Rice Husk Ash on Some Properties of Sandcrete Blocks and Concrete”, Research Journal of Applied Sciences, Vol. 3 (5), 2008, pp. 345-351.

Zareei, S. A., Ameri, F., Dorostkar, F. and Ahmadi, M. RHA as a partial replacement for cement in high strength concrete containing micro silica: Evaluating durability and mechanical properties. Case Studies in Construction Materials, vol. 7, 2017, pp. 73-81. doi: j.cscm.2017.05.001.

T. S. Amhadi and G. J. Assaf. Overview of Soil Stabilization Methods in Road Construction. GeoMEast 2018, SUCI, pp. 21–33, 2019. doi: 10.1007/978-3-030-01911-2_3.

T. S. Amhadi and G. J. Assaf. The Effect of Using Desert Sands and Cement to Stabilize the Base Course Layer of Roads in Libya. New Prospects in Geotechnical Engineering Aspects of Civil Infrastructures, Sustainable Civil Infrastructures, 2019, doi; 10.1007/978-3-319-95771-5_12

K. C. Onyelowe, Duc Bui Van, Francis Orji, Manh Nguyen Van1b, Clifford Igboayaka and Henry Ugwuanyi. “Exploring Rock by Blasting with Gunpowder as Explosive, Aggregate Production and Quarry Dust Utilization for Construction Purposes” Oklahoma State University Electronic Journal of Geotechnical Engineering, (23.04), 2018, pp 447-456.

K. C. Onyelowe. Review on the role of solid waste materials in soft soils reengineering. Materials Science for Energy Technologies, Vol. 2 (1), 2019, pp. 46-51. doi: 10.1016/j.mset.2018.10.004.

K. C. Onyelowe, G. Alaneme, C. Igboayaka, F. Orji, H. Ugwuanyi, D. Bui Van, M. Nguyen Van, Scheffe optimization of swelling, California bearing ratio, compressive strength, and durability potentials of quarry dust stabilized soft clay soil, Materials Science for Energy Technologies, vol. 2(1), 2019, pp. 67-77. doi: 10.1016/j.mset. 2018.10.005.

Bui Van Duc, Onyelowe KC and Nguyen Van Manh (2018) Capillary rise, suction (absorption) and the strength development of HBM treated with QD base Geopolymer. International Journal of Pavement Research and Technology, 2018. doi: 10.1016/j.ijprt.2018.04.003.

Jian-Tong, D., Pei-Yu, Y., Shu-Lin, L., Jin-Quan, Z. Extreme vertices design of concrete with combined mineral admixtures. Cement and Concrete Research, vol. 29, Issue 6, 1999, pp. 957-960. doi:10.1016/S0008-8846(99)00069-1.

Maerz, Norbert H., and Lusher, Mike, “Measurement of flat and elongation of coarse aggregate using digital image processing,” 80th Annual Meeting, Transportation Research Board, Washington D.C., 2001, pp. 2-14.

Minitab 18. Minitab statistical software, Minitab Inc., Pennsylvania, USA. 2018.

Design Expert 11. Design of experiment software, Stat-Ease Inc., Minneapolis, USA. 2018.




DOI: https://doi.org/10.28991/cej-2019-03091283

Refbacks

  • There are currently no refbacks.