An Investigation of the Fundamental Period of Vibration for Moment Resisting Concrete Frames
Abstract
The determination of fundamental period of vibration for structures is essential to earthquake design. The current codes provide empirical formulas to estimate the approximated fundamental period and these formulas are dependent on building material, height of structure or number of stories. Such a formulation is excessively conservative and unable to account for other parameters such as: length to width ratios, vertical element size and floors area. This study investigated the fundamental periods of mid-rise reinforced concrete moment resisting frames. A total of 13 moment resisting frames were analyzed by ETABS 15.2.2, for gross and cracked eigenvalue analysis and Extreme Loading for Structures Software® or ELS, for non-linear dynamic analysis. The estimated periods of vibration were compared with empirical equations, including current code equations. As expected, the results show that building periods estimated based on simple equations provided by earthquake design codes in Europe (EC8) and America (UBC97 and ASCE 7-10) are significantly smaller than the periods computed using nonlinear dynamic analysis. Based on the results obtained from the analyzed models, equations for calculating period of vibration are proposed. These proposed equations will allow design engineers to quickly and accurately estimate the fundamental period of moment resisting frames with taking different length to width ratios, vertical element size, floors area and building height into account. The interaction between reduction factor and the reduced period of vibration is studied, and it is found that values of maximum period of vibration can be used as an alternative method to calculate the inelastic base shear value without taking reduction factors in consideration.
Keywords
References
Applied Technology Council, and Structural Engineers Association of California. Tentative provisions for the development of seismic regulations for buildings: a cooperative effort with the design professions, building code interests, and the research community. Vol. 510. Department of Commerce, National Bureau of Standards, 1978.
Seismology Committee. (1988). Recommended lateral force requirements and tentative commentary. Structural Engineers Association of California, San Francisco, Calif, 53-54.
Bertero, Vitelmo Victorio, Fouad M. Bendimerad, and Haresh C. Shah. Fundamental period of reinforced concrete moment-resisting frame structures. No. 87. John A. Blume Earthquake Engineering Center, 1988.
Bertero, V. V., F. M. Bendimerad, and C. H. Haresh. "Fundamental period of reinforced concrete moment-resisting frame structures. The John A Blume Earthquake Engineering Center, Department of Civil and Environmental Engineering." (1988): 94305-4020.
International Conference of Building Officials. "Uniform building code." International Conference of Building Officials, 1997.
Eurocode 8: Design of structures for earthquake resistance." European Committee for Standardization, 1998.
Goel, Rakesh K., and Anil K. Chopra."Period formulas for moment-resisting frame buildings." Journal of Structural Engineering 123, no. 11 (1997): 1454-1461. doi:10.1061/(ASCE)0733-9445(1997)123:11(1454)
(ASCE/SEI 7-10, “Errata for Minimum Design Loads for Buildings and Other Structures (ASCE/SEI 7-10), All Printings.” Minimum Design Loads for Buildings and Other Structures (October 2013). doi:10.1061/9780784412916.err.
Hart, Gary C., Stuart J. Thurston, and Robert E. Englekirk. "Seismic evaluation of a tall reinforced concrete frame building." In Seismic Engineering: Research and Practice, pp. 277-286. ASCE, 1989.
ETABS, "ETABS: Integrated software for analysis, drafting and design of building system." Version 15.2.2, Computer and structures, Inc., Berkeley, California, USA, 2015.
Anderson, James C., and Vitelmo Victorio Bertero. Seismic performance of a six story reinforced concrete building. Vol. 93, no. 1. Earthquake Engineering Research Center, University of California at Berkeley, 1997.
Mirtaheri, Masoud, and Fatemeh Salehi. “Ambient Vibration Testing of Existing Buildings: Experimental, Numerical and Code Provisions.” Advances in Mechanical Engineering 10, no. 4 (April 2018): 168781401877271. doi:10.1177/1687814018772718.
Iranian code of practice for seismic resistant design of buildings (ISC) (standard no. 2800-15). 4th ed. Tehran, Iran: Building and Housing Research, Center of Iran (BHRC), 2014.
Al-Balhawi, Ali, and Binsheng Zhang. “Investigations of Elastic Vibration Periods of Reinforced Concrete Moment-Resisting Frame Systems with Various Infill Walls.” Engineering Structures 151 (November 2017): 173–187. doi:10.1016/j.engstruct.2017.08.016.
Young, Kelly, and Hojjat Adeli. “Fundamental Period of Irregular Eccentrically Braced Tall Steel Frame Structures.” Journal of Constructional Steel Research 120 (April 2016): 199–205. doi:10.1016/j.jcsr.2016.01.001.
Asteris, Panagiotis G., Constantinos C. Repapis, Emmanouela V. Repapi, and Liborio Cavaleri. “Fundamental Period of Infilled Reinforced Concrete Frame Structures.” Structure and Infrastructure Engineering 13, no. 7 (September 15, 2016): 929–941. doi:10.1080/15732479.2016.1227341.
Asteris, Panagiotis G., Athanasios K. Tsaris, Liborio Cavaleri, Constantinos C. Repapis, Angeliki Papalou, Fabio Di Trapani, and Dimitrios F. Karypidis. “Prediction of the Fundamental Period of Infilled RC Frame Structures Using Artificial Neural Networks.” Computational Intelligence and Neuroscience 2016 (2016): 1–12. doi:10.1155/2016/5104907.
Tagel-Din, Hatem, and Kimiro Meguro. "Applied Element Method for simulation of nonlinear materials: theory and application for RC structures." Structural Eng./Earthquake Eng., International Journal of the Japan Society of Civil Engineers (JSCE) Vol 17 (2000): 137-148.
Menegotto, M., and P. Pinto. "Method of Analysis for Cyclically Loaded Reinforced Concrete Plane Frames Including Changes in Geometryand Non-elastic Behavior of Elements Under Combined Normal Force and Bending." Proceedings. IABSE Sympoium on Resistance and Ultimate Deformability of Structures Acted on by Well-Defined Repeated Loads (1973).
BS EN 1992-1, "Eurocode 2: Design of concrete structures." - General rules. , London, British Standards Institution, (2004).
Extreme Loading for Structures (ELS), 2016, Theoretical Manual, Applied Science International.
Gasparini, Dario, and Erik H. Vanmarcke. "SIMQKE: A program for artificial motion generation." Department of Civil Engineering, Massachusetts Institute of Technology, Cambridge, MA (1976).
DOI: 10.28991/cej-2019-03091438
Refbacks
- There are currently no refbacks.
Copyright (c) 2019 Ahmed Nader, Khaled El Kashif, Hamed Salem
This work is licensed under a Creative Commons Attribution 4.0 International License.