Use of Fillers for Optimal Formulation of Self-Compacting Concretes
Abstract
The objective of this study is to achieve an optimal formulation of self-compacting concrete using local materials from the country of Morocco, the use of this type of concrete remains very limited compared to a concrete vibrated in this country, due to lack mastery by companies. We will therefore try to study an optimal formulation that respects European standards and gives comparable results, even improved, to those of vibrated concrete, in order to be able to replace vibrated concrete with self-compacting concrete in construction sites. Thus, SCC mixtures containing amounts of fillers were examined, and with different Portland cement dosages: 350; 375 and 400 kg/m3. The method of formulation is made in accordance with French regulations. The results obtained were compared to these vibrated concrete counterparts containing the same cement dosages. Tests include compression, traction and flexion tests at 3, 7 and 28 days of age. Several studies have been carried out internationally, but at the national level, there is no study to this effect. The results obtained show that there is an improvement in the strength of concrete, in addition to the liquid appearance of concrete. It is this last aspect that characterizes the SCC, which allows it a flow in the areas inaccessible by the vibrator, thus saving time and performance of the structure to achieve.
Keywords
References
Ozawa K., Maekawa K., Kunishima M. and Okamura H. “Performance of Concrete Based on the Durability Design of Concrete Structures”. Proceedings of the Second East Asia-Pacific Conf Structural Engineering and Construction, Chiang Mai, Thailand (1989).
EFNARC. “The European Guidelines for Self-Compacting Concrete” (2002).
Agustin, P. Hugas. “Mix Proportion and Properties of Self-Compacting Concrete, Report TVBM-5041, Division of building Materials, Lund Institute of Technology” (1999).
Aslani Farhad. and Nejadi Shami. “Mechanical Properties of Conventional and Self-Compacting Concrete: An Analytical Study.” Construction and Building Materials 36 (2012): 330–347. doi: 10.1016/j.conbuildmat.2012.04.034.
Shindoh T., Yokota K. and Yokoi K. “Effect of Mix Constituents on Rheological Properties of Super Workable Concrete.” Proceedings of the International RILEM conf, Production Methods and Workability of Concrete, Paisely, Scotland (1996).
Yazicioglu S., Caliskan S., & Turk K. “Effect of Curing on the Engineering Properties of Self-Concrete.” Indian Journal of Engineering & Materials Sciences 13 (2006): 25-29.
EN 12350-8. “Self Compacting Concrete. Part 8 – Slump Flow Test, European Standard” ( 2010).
EN 12350-10. “Self Compacting Concrete. Part 10 – L Box test, European Standard” (2010).
Dreux G., Gorisse F. and Simonnet J. “Composition des Bétons : Méthode Dreux-Gorisse, Annales de l’Institut Technique du Batiment et des Travaux Publics, France” (1983).
Nagamoto N. and Ozawa K. “Mixture properties of Self-Compacting, High-Performance Concrete.” Proceedings of Third CANMET/ACI International Conferences on Design and Materials and Recent Advances in Concrete Technology, SP-172, V. M. Malhotra, American Concrete Institute, Farmington Hills, Mich (1997).
Khayat K.H. and Ghezal A. “Utility of Statistical models in Proportioning Self-Compacting Concrete.” Proceedings, RILEM International symposium on Self-Compacting Concrete, Stockholm (1999).
Shi Chen, He Ting-shu, Zhang Ge, Wang Xi and Hu Yanyan. “Effects of Superplasticizers on Carbonation Resistance of Concrete.” Construction and Building Materials 108 (2016): 48–55. doi : 10.1016/j.conbuildmat.2016.01.037.
Yamada Kazuo, Takahashi Tomoo, Hanehara Shunsuke and Matsuhisa Matsuhisa. “Effects of the Chemical Structure on the Properties of Polycarboxylate-Type Superplasticizer.” Cement & Concrete Researsh, 30 (2000): 197–207. doi: 10.1016/S0008-8846(99)00230-6.
Kreppelt Fritz, Weibel Martin, Zampini Davide and Romer Micheal. “Influence of solution chemistry on the hydration of polished clinker surfaces—a Study of Different Types of Polycarboxylic Acid-Based Admixtures.” Cement & Concrete Researsh 32 (2002): 187–198. doi: 10.1016/S0008-8846(01)00654-8.
Carazeanu Ionela, Chirila Elisabita and Georgescu Maria. “Investigation of the Hydration Process in 3CaO–Al2O3–CaSO4–2H2O–Plasticizer–H2O Systems by X-ray Diffraction.” Talanta 57 (2002): 617–623. doi: 10.1016/S0039-9140(02)00100-5.
Yu Yinhui, Liu Jiaping, Ran Qianping, Qiao Min and Zhou Dongliang. “Current Understanding of Comb-Like Copolymer Dispersants Impact on the Hydration Characteristics of C3A–Gypsum Suspension.” J. Therm. Anal. Calorim. 111 (2013): 437–444. doi: 10.1007/s10973-012-2430-3.
Felekoglu Burak. “A comparative Study on the Performance of Sands Rich and Poor in Fines in Self-Compacting Concrete.” J. Cons.Bui. Mat. 22 (2008): 646–654. doi: 10.1016/j.conbuildmat.2006.10.007.
Aggarwal P., Siddique R., Aggarwal Y. and Gupta S.M. “Self-Compacting Concrete - Procedure for Mix Design.” Leonardo Electronic Journal of Practices and Technologies 12 (2008): 15-24.
NM 10.1.700. “Essais pour Déterminer les Caractéristiques Géométriques des Granulats - Détermination de la Granularité - Analyse granulométrique par Tamisage, Morrocan Standards” (2008).
NM 10.1.155. “Granulats - Mesure du coefficient d'aplatissement, Morrocan Standards » (1995).
NM 10.1.146. “Granulats-Mesure des Masses Spécifiques de la Porosité du Poefficient d'Absorption de la Teneur en Eau des Gravillons et Cailloux, Morrocan Standards (1995).
NM 10.1.149. “Granulats-Mesure des Masses Spécifiques, Coefficient d'Absorption et Teneur en Eau des Sables, Morrocan Standards” (1995).
NM 10.1.169, “Granulats-Détermination de la Propreté Puperficielle, Morrocan Standards” (1995).
NM 10.1.147. “Granulats - Equivalent de Sable, Morrocan Standards” (1995).
NM 10.1.138. “Granulats - Essai Los Angeles, Morrocan Standards” (1995).
EN 12390-3. “Testing Harderned Concrete. Part 3 – Compressive Strength of Test Specimens, European Standards” (2002).
EN 12390-5. “Testing harderned concrete. Part 5 – Flexural Strength of test Specimens, European Standards” (2002).
NM 10.1.008. “Béton : Spécifications, Performances, Production et Conformité, Morrocan Standards” (2007).
Ravinder Kaur Sandhu and Rafat Siddique. “Influence of rice husk ash (RHA) on the properties of self-compacting concrete: A review.” J. Cons.Bui. Mat. 153 (2017): 751–764. doi.org/10.1016/j.conbuildmat.2017.07.165.
Stefania Manzi, Claudio Mazzotti and Maria Chiara Bignozzi. “Self-compacting concrete with recycled concrete aggregate: Study of the long-term properties.” J. Cons.Bui. Mat. 157 (2017): 582–590. doi.org/10.1016/j.conbuildmat.2017.09.129.
Miguel C.S. Nepomuceno, L.A. Pereira-de-Oliveira and S.M.R. Lopes. “Methodology for the mix design of self-compacting concrete using different mineral additions in binary blends of powders.” J. Cons.Bui. Mat. 64 (2014): 82–94. doi.org/10.1016/j.conbuildmat.2014.04.021.
DOI: 10.28991/cej-030969
Refbacks
- There are currently no refbacks.
Copyright (c) 2018 ABDELHAMID NOUFID, Sougrati Belattar
This work is licensed under a Creative Commons Attribution 4.0 International License.